At a Glance
The 3M 7502 is the medium size of 3M's premium 7500 Series reusable half facepiece respirator. It has a soft silicone faceseal, the 3M Cool Flow valve to release warm, moist breath, and a dual-mode harness that drops down so you can take a break without removing your hard hat.
Best for
- Painting, spraying and solvent work, with organic vapor cartridges
- Dust, sanding and grinding, with particulate filters
- All-day wear where comfort matters
Specifications
| Size |
Medium (7501 is small, 7503 is large) |
| Faceseal |
Silicone |
| Valve |
3M Cool Flow exhalation valve |
| Harness |
Dual mode: standard or drop-down |
| Compatible with |
3M 2000, 5000 and 7000 Series filters and 6000 Series cartridges (bayonet) |
| Approval |
NIOSH approved with 3M filters and cartridges |
| Pack |
10 per case |
FAQ
Does the 7502 come with cartridges? No. It's the facepiece only, so add the 3M filters or cartridges that match your hazard.
Do I need a fit test? Yes. It's a tight-fitting respirator, so OSHA requires a fit test before use on the job, and a seal check each time you put it on.
Shop more reusable respirators.
3M™ Half Facepiece Reusable Respirator 7500 Series is a premium facepiece with a 3M™ Cool Flow™ Valve, a soft silicone faceseal for comfort, and a dual-mode head harness for either standard or drop-down mode. 3M™ 7500 Series is NIOSH-approved with a wide variety of 3M bayonet-style filters and cartridges.
Features
- 3M™ Cool Flow™ Valve helps release warm and moist exhaled breath from inside the respirator
- Soft silicone sealing surface that’s been specially designed with the wearer in mind
- Compatible with 3M™ 2000, 5000, 7000 Series filters and 6000 Series cartridges to suit individual needs
- When used with the correct 3M bayonet-style filters or cartridges it can protect against a broad range of gases, vapors and/or particulate hazards
- Can be used with 3M™ Powered and Supplied Air Systems including TR-600, TR-800 and Dual Airline for increased convenience and flexibility
- Unique head harness and optional drop-down strap design provide ease of use
Recommended Application
- Machining
- Sawing
- Welding
- Cleaning
- Smelting
- Furnace Operation
- Composite Finishing
- Sanding
- Painting
- Pouring/Casting
- Grinding
- Chipping
- Chemical Handling
Spec Sheet
Downloads
Document InstructionsSafety Data SheetDocument ArticlesDocument BrochuresDocument Technical PapersDocument CatalogsSpec Sheet
US Dollars
