3M Products & Supplies

3M Polyimide Hybrid Bond Diamond Wheels and Tools, 1A1, 6X3/8X.7874, X=3/8 D220 665PK - MMMPBDW46541

SKU: 7010496146
MPN: 7010496146
Lead Time: 40 working days.
UPC: 00638060004548
3M ID: 65500404465
5 Digit UPC: 454
Country of Origin: USA
Manufacturer: 3M
$623.50 each
Hurry up! Current stock:
3M Diamond Wheel 665PK is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and wheel life at average cut rates.

High Performance Grinding
Our hybrid diamond wheels are designed for high performance grinding on carbide. The 3M Diamond Wheel 665PK line is specifically designed for the production and sharpening of cutting tools, including end work, gashing and cutting primary and secondary relief edges. Primary relief involves removing material directly behind the cutting edge to enhance chip clearance. For secondary relief, a slight bevel is ground next to the primary relief. End work grinds a small relief angle on the tip of the tool, while gashing adds a slot along the cutting face to allow for chip flow. Each of these processes require the highest level of quality that our 3M Diamond Wheel 665PK provides.

Heat Resistant Bonding
These superabrasive wheels also uses a polyimide bonding and are specially designed to resist thermal and chemical deterioration, which can occur during high speed grinding. This R rated bond is very hard and excellent for precision work on softer tool metals like carbide. This also allows for longer run times and longer over-all wheel life. Used in wet grinding applications with high volume flood coolant systems, this bonding material can be used with wither water or oil based lubricants for greater flexibility.

Available in a Variety of Forms
3M provides a broad portfolio of superabrasive wheels used for your round tool relief and clearance angle applications. The 3M Diamond Wheel 665PK line features a variety of metal cores, including aluminum, steel, composite and copper, and can be cut with custom arbor holes to fit customer specifications. From short runs and re-sharpening to “lights-out” and long production runs, 3M has the wheel design to meet your needs.

Extra Details

  • Arbor holes are made to customer specifications
  • Designed to provide a balance of form retention and cut rate
  • Diamond abrasive capable of cutting or shaping cemented carbide, ferrites and ceramics
  • Polyimide bonding resists thermal and chemical deterioration
  • Various wheel designs are available for gashing, primary and secondary relief and end work

Customers Also Viewed