primary_image
alternate_image
primary_image
alternate_image
primary_image
alternate_image
Previous Next

3M Products & Supplies

3M™ Scotch-Weld™ Structural Plastic Adhesive 8010, Blue, Part A, 1 Gallon Can, Drum - 7100050479

SKU: 7100050479
MPN: 7100050479
Made to Order: For a lead time estimate, please send your request to [email protected]
UPC: 00021200491139
3M ID: 62288375306
5 Digit UPC: 49113
$1,996.59 each
Hurry up! Current stock:

Product Description

3M™ Scotch-Weld™ Structural Plastic Adhesive 8010 is a two-part acrylic adhesive specially formulated to bond many low surface energy (LSE) plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs). This adhesive has a medium viscosity for controlled dispensing and spreads easily, creating structural bonds without the need for special surface treatments like chemical etching, plasma, flame, corona treatment, or priming. It offers a mix ratio of 10:1 and provides 8 minutes of working time, reaching handling strength in approximately 1 hour and fully curing in 24 hours at 73 °F (23 °C). 3M™ Scotch-Weld™ Structural Plastic Adhesive 8010 is available in a Duo-Pak (DP); when using this adhesive, or other Duo-Pak options, rely on 3M Applicators for convenient and accurate metering, mixing, and dispensing.

Features

  • FULL CURE TIME: Fully cured in 48 hours at 73 °F (23 °C)
  • LESS PREP TIME: Made to function with little to no surface preparation
  • RECOMMENDED APPLICATIONS: Creates long-lasting bonds across the electronics, transportation, and construction industries
  • EXTREMELY STRONG: Can replace mechanical fasteners, screws, rivets, and spot welds in many applications
  • AMPLE OPPORTUNITY FOR REPOSITIONING: Offers up to 10 minutes for project readjustment
  • KEY SUBSTRATES: Joins a variety of low surface energy plastics, including many grades of Polypropylene, Polyethylene, and TPOs without special surface preparation
Spec Sheet

 

Downloads

Specifications

Shelf Life273
Country of OriginUnited States
Set Time60 min
Units per Case1.0
Shear Strength UOMpsi
IndustriesConstruction, Consumer Goods, Electronics, General Industrial, Metalworking, Military and Government, Signage, Specialty Vehicles, Transportation, Woodworking
Specific Gravity1.06
Shear Strength2700.0
Storage Temperature (Celsius)4 °C
Container Size (Metric)3.78 L
Volume (Imperial)1.0
Adhesive TypeAcrylic
Volume (Imperial) UOMgal
Full Cure Time8 hr - 24 Hour
Design ChallengesNoise Vibration & Harshness Control NVH
Physical FormFlowable Liquid
Volume (Metric)3.8
Hardness55 - 60 Shore D
Volume (Metric) UOML
Container Size (Imperial)1.0 gal

Customers Also Viewed