primary_image
alternate_image
primary_image
alternate_image
primary_image
alternate_image
Previous Next

3M Products & Supplies

3M™ Scotch-Weld™ Structural Plastic Adhesive 8010, Blue, Part A, 5 Gallon (Pail), 1 Each/Drum - 7000046400

Sold As: 5-Pack
SKU: 7000046400
MPN: 7000046400
Made to Order: For a lead time estimate, please send your request to [email protected]
UPC: 00021200491153
3M ID: 62288385305
5 Digit UPC: 49115
$9,982.95 ($1996.59 / Count)
Hurry up! Current stock:

Product Description

3M™ Scotch-Weld™ Structural Plastic Adhesive 8010 is a two-part acrylic adhesive specially formulated to bond many low surface energy (LSE) plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs). This adhesive has a medium viscosity for controlled dispensing and spreads easily, creating structural bonds without the need for special surface treatments like chemical etching, plasma, flame, corona treatment, or priming. It offers a mix ratio of 10:1 and provides 8 minutes of working time, reaching handling strength in approximately 1 hour and fully curing in 24 hours at 73 °F (23 °C). 3M™ Scotch-Weld™ Structural Plastic Adhesive 8010 is available in a Duo-Pak (DP); when using this adhesive, or other Duo-Pak options, rely on 3M Applicators for convenient and accurate metering, mixing, and dispensing.

Features

  • FULL CURE TIME: Fully cured in 48 hours at 73 °F (23 °C)
  • LESS PREP TIME: Made to function with little to no surface preparation
  • RECOMMENDED APPLICATIONS: Creates long-lasting bonds across the electronics, transportation, and construction industries
  • EXTREMELY STRONG: Can replace mechanical fasteners, screws, rivets, and spot welds in many applications
  • KEY SUBSTRATES: Joins a variety of low surface energy plastics, including many grades of Polypropylene, Polyethylene, and TPOs without special surface preparation
  • AMPLE OPPORTUNITY FOR REPOSITIONING: Offers up to 10 minutes for project readjustment
Spec Sheet

 

Downloads

Specifications

Shelf Life273
Country of OriginUnited States
Full Cure Time8 hr - 24 Hour
Adhesive TypeAcrylic
Volume (Metric) UOML
Container Size (Metric)18.93 L
IndustriesConstruction, Consumer Goods, Electronics, General Industrial, Metalworking, Military and Government, Signage, Specialty Vehicles, Transportation, Woodworking
Units per Case1.0
Volume (Metric)19.0
Volume (Imperial) UOMgal
Design ChallengesNoise Vibration & Harshness Control NVH
Hardness55 - 60 Shore D
Container Size (Imperial)5.0 gal
Physical FormFlowable Liquid
Storage Temperature (Celsius)4 °C
Set Time60 min
Volume (Imperial)5.0
Shear Strength2700.0
Specific Gravity1.06
Shear Strength UOMpsi

Customers Also Viewed