primary_image
alternate_image
primary_image
alternate_image
primary_image
alternate_image
Previous Next

3M Products & Supplies

3M™ Scotch-Weld™ Structural Plastic Adhesive 8010, Blue, Part B, 5 Gallon (Pail), Drum - 7100036720

Sold As: 5-Pack
SKU: 7100036720
MPN: 7100036720
Made to Order: For a lead time estimate, please send your request to [email protected]
UPC: 00051115716690
3M ID: 62286385307
5 Digit UPC: 71669
$9,982.42 ($1996.48 / Count)
Hurry up! Current stock:

Product Description

3M™ Scotch-Weld™ Structural Plastic Adhesive 8010 is a two-part acrylic adhesive specially formulated to bond many low surface energy (LSE) plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs). This adhesive has a medium viscosity for controlled dispensing and spreads easily, creating structural bonds without the need for special surface treatments like chemical etching, plasma, flame, corona treatment, or priming. It offers a mix ratio of 10:1 and provides 8 minutes of working time, reaching handling strength in approximately 1 hour and fully curing in 24 hours at 73 °F (23 °C). 3M™ Scotch-Weld™ Structural Plastic Adhesive 8010 is available in a Duo-Pak (DP); when using this adhesive, or other Duo-Pak options, rely on 3M Applicators for convenient and accurate metering, mixing, and dispensing.

Features

  • LESS PREP TIME: Made to function with little to no surface preparation
  • AMPLE OPPORTUNITY FOR REPOSITIONING: Offers up to 10 minutes for project readjustment
  • EXTREMELY STRONG: Can replace mechanical fasteners, screws, rivets, and spot welds in many applications
  • FULL CURE TIME: Fully cured in 48 hours at 73 °F (23 °C)
  • RECOMMENDED APPLICATIONS: Creates long-lasting bonds across the electronics, transportation, and construction industries
  • KEY SUBSTRATES: Joins a variety of low surface energy plastics, including many grades of Polypropylene, Polyethylene, and TPOs without special surface preparation
Spec Sheet

 

Downloads

Specifications

Shelf Life273
Country of OriginUnited States
Container Size (Imperial)5.0 gal
IndustriesConstruction, Consumer Goods, Electronics, General Industrial, Metalworking, Military and Government, Signage, Specialty Vehicles, Transportation, Woodworking
Volume (Metric) UOML
Full Cure Time8 hr - 24 Hour
Storage Temperature (Celsius)4 °C
Set Time60 min
Volume (Imperial) UOMgal
Volume (Imperial)5.0
Shear Strength UOMpsi
Units per Case1.0
Design ChallengesNoise Vibration & Harshness Control NVH
Hardness55 - 60 Shore D
Adhesive TypeAcrylic
Container Size (Metric)18.93 L
Shear Strength2700.0
Volume (Metric)20.0
Physical FormFlowable Liquid

Customers Also Viewed