The Makita 40V max XGT® 3-Speed 1/2" Hammer Driver-Drill (GPH03) is Makita’s most powerful Hammer Driver Drill delivering 1,590 in.lbs. of max torque with a three speed transmission. The GPH03 breaks new ground for the most demanding drilling and driving applications in wood, masonry and metal. The hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry The GPH03 features an electronic digital clutch that accurately targets the desired torque range during fastening (41 settings in low speed, 30 settings in medium, 21 settings in high). It features faster drilling speeds with 3 speed settings (0-650 / 0-1,800 / 0-2,600 RPM) (0-9,750 / 0-27,000 / 0-36,000 IPM). The 3 Speed Hammer Driver Drill features Active Feedback-sensing Technology (AFT®), which turns the motor off if rotation of the accessory is suddenly forced to stop. It also features twice the working speed without overloading batteries in Medium Speed*. The GPH03 features a redesigned side handle that provides stability and grip under heavy torque applications to maintain control. It also features an all-metal chuck for increased job site durability and a reinforced gear housing that is engineered for maximum job site durability. The GPH03 is a workhorse tool engineered to outlast with Extreme Protection Technology (XPT™) to provide increased dust and water resistance in harsh jobsite conditions. An LED job light provides wider illumination from the base-mounted position. XGT® is a system of equipment, tools, batteries, and chargers utilizing 40V max lithium-ion batteries. XGT® is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT® is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart, and outlast the rest. *vs. Previous models with only 2 speed
Features
- OUTPOWER: Makita's most powerful Hammer Driver-Drill delivers 1,590 in.lbs. of Max Torque with a brushless motor
- XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
- Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 30 settings in medium, 21 settings in high)
- Redesigned side handle provides stability and grip under heavy torque applications to maintain control
- Electronic digital clutch accurately targets desired torque range during fastening (41 settings in low speed, 30 settings in medium, 21 settings in high)
- Twice the working speed without overloading batteries with Medium Speed*
- The XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging (charger not included)
- The XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
- Makita's most powerful Hammer Driver-Drill delivers 1,590 in.lbs. of Max Torque with a brushless motor
- Hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry
- Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
- OUTSMART: 3-Speed Transmission provides optimal balance of speed and torque for maximum efficiency
- Reinforced gear housing engineered for maximum job site durability
- *vs. Previous models with only 2 speeds
- Only use genuine Makita® Batteries and Chargers
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- Faster drilling speeds with 3 speed settings (0-650 / 0-1,800 / 0-2,600 RPM) (0-9,750 / 0-27,000 / 0-36,000 IPM)
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the accessory is suddenly forced to stop
- All-metal chuck for increased job site durability
- XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications (batteries not included)
- The XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- INCLUDES - Tool only (battery and charger not included)
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- OUTLAST: Twice the working speed without overloading batteries in Medium Speed*
- 3-year limited warranty
- VERSATILITY - 3 speed settings (0-650 / 0-1,800 / 0-2,600 RPM) (0-9,750 / 0-27,000 / 0-36,000 IPM)
- DURABILITY - XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- POWER - Our most powerful Hammer Drill delivers 1,590 in.lbs. Max Torque with Makita-built brushless motor
- 3-Speed Transmission provides optimal balance of speed and torque for maximum efficiency
- INNOVATION - 3-Speed Transmission provides optimal balance of speed and torque for maximum efficiency
- Ultra-smooth variable trigger provides optimum speed control
- LED job light provides wider illumination from the base-mounted position
Prop 65
- WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. For more information, visit www.P65warnings.ca.gov.
Includes
- Side Handle, GPH03 (122J20-5)
Downloads
Makita GPH03 Instruction Manual
US Dollars
