The 40V max XGT® Brushless Cordless 4-Speed 1/2" Sq. Drive Impact Wrench w/ Detent Anvil (GWT05Z, tool only) provides improved fastening control, ideal for automotive, installation, and fabrication trades. The Makita-built brushless motor delivers 465 ft.lbs. of Nut-Busting Torque and 260 ft.lbs. of Fastening Torque to out-power similar impact wrenches in heavy-load applications. Precise fastening control is achieved through the 4-speed power selection switch, which accounts for a wide range of applications. Three forward and three reverse rotation auto-stop modes offer increased efficiency when fastener is adequately loosened. The full-speed mode function reduces the trigger pull to reach full speed. The GWT05Z features Makita's Extreme Protection Technology (XPT™), a series of protective seals inside the tool. It is designed to improve a tool’s operation in harsh conditions by channeling water and dust from key internal components. Reinforced gear housing provides additional durability on the job site. XGT is a system of equipment, tools, batteries and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
Features
- 3 forward and 3 reverse Auto-Stop modes for increased efficiency
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- The XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging (charger not included)
- VERSATILITY - 4-speeds (0-1,000 / 0-1,800 / 0-2,600 / 0-3,200 RPM & 0-1,800 / 0-2,600 / 0-3,400 / 0-4,000 IPM)
- 3-year limited warranty
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- Only use genuine Makita® Batteries and Chargers
- OUTLAST: XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- INNOVATION - 3 forward and 3 reverse Auto-Stop modes for increased efficiency
- The XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
- Makita-built motor delivers 465 ft.lbs. of Nut-Busting Torque and 260 ft.lbs. of Fastening Torque
- Compact length at only 5-5/8"; ideal for working in tight spaces
- 4-speed power selection (0-1,000 / 0-1,800 / 0-2,600 / 0-3,200 RPM & 0-1,800 / 0-2,600 / 0-3,400 / 0-4,000 IPM) for a wide range of applications
- OUTSMART: 3 forward and 3 reverse Auto-Stop modes for increased efficiency
- Reinforced gear housing engineered for maximum job site durability
- 4-speed power selection switch (0-1,000 / 0-1,800 / 0-2,600 / 0-3,200 RPM & 0-1,800 / 0-2,600 / 0-3,400 / 0-4,000 IPM) for a wide range of applications
- Full speed mode function reduces trigger pull to reach full speed
- XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
- OUTPOWER: Makita-built motor delivers 465 ft.lbs. of Nut-Busting Torque and 260 ft.lbs. of Fastening Torque
- Ultra-smooth variable speed trigger provides optimum control
- POWER - Makita-built motor delivers 465 ft.lbs. of Nut-Busting Torque and 260 ft.lbs. of Fastening Torque
- The XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
- INCLUDES - Tool only (battery and charger not included)
- XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications (batteries not included)
- DURABILITY - XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
Prop 65
- WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. For more information, visit www.P65warnings.ca.gov.
Downloads
GWT05 Parts BreakdownGWT05 Instruction Manual
US Dollars
