The 80V max (40V max X2) XGT® Brushless 2” AVT® Rotary Hammer Kit (GRH06PM) is a cordless concrete solution designed for heavy-load applications. It delivers the power, speed, and run-time for corded demands, without the cord. The GRH06PM is powered by two 40V max lithium-ion batteries, with an 80V brushless motor that delivers up to 27% faster drilling performance than an equivalent corded model. This hard-hitting performance is combined with advanced comfort and convenience features including Active Feedback-Sensing Technology (AFT®), which electronically turns off the motor if rotation of bit is suddenly forced to stop. It is also equipped with Anti-Vibration Technology (AVT®) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. In addition, the vibration-absorbing back handle and side handle are engineered to further reduce vibration. For added durability in harsh job site conditions, Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance. The Rotary Hammer has dust extraction capability with an optional Makita® Dust Attachment Kit (sold separately). For added efficiency, the GRH06PM is equipped with Auto-Start Wireless System (AWS®), which uses Bluetooth® technology for wireless power-on and power-off communication between the equipped tool and dust extractor (sold separately). Once connected via AWS, the AWS-equipped dust extractor will automatically power on or off when the AWS-equipped cordless tool starts or stops, running only when the tool is in use. This increases productivity on a single charge and reduces continuous noise at the job or work site. Constant speed control automatically applies additional power under load for optimum performance. The torque limiting clutch is engineered to prevent gear damage by automatically disengaging the gears if the bit binds, and constant speed control automatically adds power to the motor to maintain speed under load to complete the most demanding jobs. It has 2-modes of operation - "Hammering with Rotation" or "Hammering Only". Additional performance features include an electric brake, variable speed dial, built-in L.E.D. light, a soft-start to suppress start-up reaction, and Soft No-load function that automatically reduces the speed of the motor when idling. The GRH06PM is ideal for a range of trades including mechanical/electrical/plumbing contractors, concrete contractors, road and bridge contractors, utility workers, pest control, maintenance operations, and more. It accepts SDS-MAX bits. XGT is a system of equipment, tools, batteries and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
Features
- The XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
- 40V max XGT® Lithium-Ion 4.0Ah Battery (BL1840) reaches a full charge in 45 minutes or less
- 80V max (40V max X2) XGT® Brushless 2" SDS-MAX AVT® Rotary Hammer, AWS® Capable (GRH06Z)
- Soft start suppresses start-up reaction for more precision and better accuracy
- Constant speed control automatically applies additional power under load for optimum performance
- 40V max XGT® Dual Port Rapid Optimum Charger (DC40RB)
- "Soft no-load" function automatically reduces the speed of the motor when idling to help increase tool life and performance
- DUST MANAGEMENT - AWS® Capable for wireless power-on/off communication between tool and extractor
- Multiple bit angle settings allows the steel/bit to be set at different positions for operating convenience
- COMFORT - AVT® is a counterbalance system along with vibration-absorbing handles that work to reduce vibration
- Automatic-start Wireless System (AWS®) for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
- XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- OUTSMART: Auto-start Wireless System (AWS®) utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
- Dust extraction capability with optional Makita Dust Attachment Kit
- CONTROL - AFT® electronically turns off the motor if rotation of bit is suddenly forced to stop
- The XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
- Variable speed dial enables the operator to match the speed to the application
- Tool Case
- PERFORMANCE - Brushless motor and two 40V max XGT® batteries combine to deliver the power for heavy applications
- Large Multi-finger power trigger for increased comfort during extended use
- OUTLAST: Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears during a bind-up situation
- Built-in L.E.D. light with an independent on/off switch illuminates the work area
- Hammer Bit Grease (194683-7)
- OUTPOWER: Makita-built brushless motor along with two 40V max XGT® batteries combine to deliver up to 27% faster drilling performance than corded equivalent model*
- The XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
- XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
- Depth Gauge (331955-1)
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- Side Handle (135283-4)
- 2-mode operation for "Hammering with Rotation" or "Hammering Only" for increased versatility
- Makita-built brushless motor along with two 40V max XGT® batteries combine to deliver up to 27% faster drilling than corded equivalent model*
- Electric brake allows the tool to be repositioned faster for maximum productivity
- Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
- 2 40V max XGT® 4.0Ah Battery (BL4040)
- Anti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
- INCLUDES - (2) 40 max XGT® batteries, rapid charger, side handle, grease, towel, batteries, charger, tool case
Prop 65
- WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. For more information, visit www.P65warnings.ca.gov.
Downloads
GRH06 Instruction ManualGRH06 Parts Breakdown
US Dollars
