Scotch-Brite Metal Finishing Wheel, 8 in x 2 in x 3 in 5AMED
Scotch-Brite Metal Finishing Wheel, 8 in x 2 in x 3 in 5AMED
Scotch-Brite Metal Finishing Wheel, 8 in x 2 in x 3 in 5AMED
Previous Next

3M Products & Supplies

Scotch-Brite Metal Finishing Convolute Wheel, MF-WL, 5A Coarse, 12 in x 1 in x 5 in, 1 ea/Case

SKU: 7010329074
MPN: 7010329074
Made to Order: Lead time from 3M is approximately 15 working days.
UPC: 00048011053981
3M ID: 61500038056
5 Digit UPC: 5398
Shelf Life: 3650 Days
Country of Origin: USA
Manufacturer: 3M
Size: 12 in1 in
Abrasive Material: Aluminum Oxide
Color: Maroon
$202.48 each
Hurry up! Current stock:
Product Description  
Scotch-Brite Metal Finishing Wheel combines conformability with consistent abrasive cutting action to provide uniform brushed stainless and satin finishes. The Metal Finishing Wheel is also used effectively to blend and match #3 or #4 mill finishes on stainless steel and to create brushed or satin finishes on items such as cutlery, appliance trim, builders hardware, and plumbing fixtures.

On softer metals like aluminum, copper, and brass, our Scotch-Brite™ Metal Finishing Wheels are used to blend out minor surface imperfections and handling marks while providing the desired decorative finish on products such as builder's hardware, and plumbing fixtures. Typically used on stationary machinery, the wheels are available in diameters of 6 to 16 inches and widths of 1/2 inch and greater. This highly conformable wheel is convolutely wound on a core to run smoothly and help create professional finishing results. Available in grade CRS and MED.

Our Scotch-Brite™ Metal Finishing Wheel uses aluminum oxide abrasive. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

Extra Details

  • Controlled abrasive action helps prevent undercutting or gouging
  • Convolute construction wound around a fiber core runs smooth to provide fine, uniform finishing
  • High conformability and uniform wear provides consistent cutting power to produce superior satin, mill and brushed finishes
  • Highly conformable wheel effectively finishes irregular or contoured surfaces
  • Open-web construction resists loading and runs cool to provide professional results on stainless steel, brass, aluminum and other metals

Data Sheet

  1. Tech Data Sheet
  2. Safety Data Sheet

Customers Also Viewed