Stock Item:Typical lead time for Starrett products is 1-2 weeks
UPC:49659512052
$299.23
each
Product Description
Rigid, well-designedThe top of the beam is flattened so that when the trams are clamped in position, they will not turn from pressure on the pointsThe 3 in (75mm) points may be adjusted for length in the spring chucks and can be easily replaced with caliper legs or other attachments listed.
Rigid, well-designedThe top of the beam is flattened so that when the trams are clamped in position, they will not turn from pressure on the pointsThe 3 in (75mm) points may be adjusted for length in...
Rigid, well-designedThe top of the beam is flattened so that when the trams are clamped in position, they will not turn from pressure on the pointsThe 3 in (75mm) points may be adjusted for length in...
The heads will accommodate any size beam from 3/4 to 1-1/2 in (19- 38mm) in widthSince beam length requirements vary widely, and they are easy for the user to fashion, we do not furnish a...
Knife-edge contacts for both inside and outside measurements One hand use with the thumb-operated, fine adjustment roll Lock screw for dial bezel Lock screw for holding the sliding jaw in position...
Quadrant adjusting nut for fine adjustments Sturdy constructed joint with quadrant, eliminates side deflection of the legs Forged steel, tempered and polished legs Removable, adjustable point can...