3M Products & Supplies

3Mâ„¢ Cushion-Mountâ„¢ Plus Plate Mounting Tape E1020, White, 48 in x 25 yd, 20 mil, 1 Roll/Case

SKU: 7010295552
MPN: 7010295552
Made to Order: Lead time from 3M is approximately 22 working days.
UPC: 00051125748513
3M ID: 70002020397
5 Digit UPC: 74851
Shelf Life: 730 Days
Country of Origin: USA
Manufacturer: 3M
Size: 48 in
Color: White
$1,728.11 each
Hurry up! Current stock:
3M Cushion-Mount Plus Plate Mounting Tape E1020 with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This white foam mounting tape provides high quality standard combination print.

Bubble Free Flexographic Plate Mounting
3M Cushion-Mount Plus Plate Mounting Tape E1020 is a white foam tape that provides high quality combination print. This is the standard tape for combination print. It has the air release feature that allows for bubble free mounting. This flexographic plate mounting tape has excellent resistance to lifting on press allowing for easy and clean plate removal.

Recommended Applications

  • Mounting photopolymer plates to flexographic printing cylinders and sleeves
  • Used in combination, process and solid printing processes
  • 3M sticky back tapes are designed for wide-web presses to print film or paper for flexible packaging industry

3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high speed print runs.

This cushion tape is manufactured for 20 mil applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting.

On Easy with Reduced Air Entrapment
3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique micro-channels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting.

Keep the Presses Running and your Customers Coming Back
For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done.

Extra Details

  • 0.020 inch (0.51 mm) double coated foam tape has the air release feature with a plate side adhesive technology designed to remove with less force from flexographic print plates
  • Cushioned flexographic plate mounting sticky back foam tape
  • Flexographic printing, flexographic printers
  • Grooves in the adhesive are created by a cross-hatch pattern from the release liner
  • Has a standard medium density foam that is ideal for printing combinations of solids and process with halftone dots
  • Plate easily demounts from the double coated cushioned tape without adhesive residue
  • Print plates mounted on E1020 will have no air bubbles under the plate due to the air release feature designed into the tape
  • Securely bonds the flexographic photopolymer plate to the print sleeve or steel cylinder to prevent plate edge lifting during printing
  • Tape also removes cleanly from the sleeve or steel print cylinder
  • White foam color indicates the standard, medium density foam

Data Sheet

  1. Tech Data Sheet

Customers Also Viewed