This 2-mil glossy film is ink jet printable with a pressure sensitive adhesive. These films are an excellent choice for permanent, medium term cut graphics or single panel vertical graphics and signs. This film is forward wound on an unnotched core.
2-mil, gloss,??ermanent, opaque, pressure-sensitive film
Available in white, black and transparent and resists gasoline and vapor spills
Great for Commercial fleet vehicle graphics and emblems as well as??mall format original equipment manufacturer's decorative and identification graphics, cautionary, safety and vandal-resistant labeling
This 3.5-mil, intermediate product is intended for graphics with up to five years durability in both indoor and outdoor applications. Designed for electronic cutting, screen printing and thermal...
White film with a typical coefficient of retroreflection of 100. Meets ASTM D 4956 07 for Type 1 sheeting (section 6.1.1) and NFPA requirements. Designed for screen printing and electrostatic...
White film with a typical coefficient of retroreflection of 100. Meets ASTM D 4956 07 for Type 1 sheeting (section 6.1.1) and NFPA requirements. Designed for screen printing and electrostatic...
White film with a typical coefficient of retroreflection of 100. Meets ASTM D 4956 07 for Type 1 sheeting (section 6.1.1) and NFPA requirements. Designed for screen printing and electrostatic...
White film with a typical coefficient of retroreflection of 100. Meets ASTM D 4956 07 for Type 1 sheeting and NFPA requirements. Designed for screen, electrostatic, thermal mass transfer printing.