3M Products & Supplies
3M™ Wraparound Heat Shrink Cable Repair Sleeve HDCW-35/10-750, Length 29.5 in (750 mm), 5/case - 7000138421
3M™ Heat Shrink Cable Repair Sleeve HDCW is designed to repair quickly damaged cable jacketing. This wraparound sleeve can be used as insulation material on cable and splices up to 1000V and as jacket repair material on cable up to 35 kV. The cross linked polyolefin construction has an adhesive that offers moisture seal protection.
Features
Downloads
| Country of Origin | Germany |
|---|---|
| Inner Diameter Before Shrink (Imperial) | 3.94 |
| Splice Type | Heat Shrink |
| Overall Length (Metric) UOM | mm |
| Elongation UOM | % |
| Minimum Expanded Tubing I. D. | 3.66 |
| Minimum Shrink Temperature (Celsius) | 125.0 |
| Overall Length (Imperial) | 29.5 |
| Units per Case | 5.0 |
| Inner Diameter After Shrink (Imperial) UOM | in |
| Product Type | Splice |
| Inner Diameter After Shrink (Metric) | 23.0 |
| Voltage | 1 kV |
| UV Resistant | Yes |
| Chemical Resistant | Yes |
| Jacket Repair Range | 0.98 to 3.15 Inch |
| Material | Adhesive-lined, Cross-Linked Polyolefin |
| Splice Configuration | Heat Shrink Cable Repair Wrap Sleeve (HDCW) |
| Inner Diameter After Shrink (Imperial) | 0.9 |
| Inner Diameter Before Shrink (Metric) UOM | mm |
| Dielectric Strength (V/mil) | 22 kV/mm |
| Maximum Voltage Rating | 1 kV to 35 kV |
| Overall Length (Metric) | 750.0 |
| Sleeve Length UOM | in |
| Product Technology | Heat Shrink |
| Inner Diameter After Shrink (Metric) UOM | mm |
| Heat Shrink Type | Heat Shrink Molded Shapes |
| Minimum Expanded Tubing I. D. UOM | in |
| Inner Diameter Before Shrink (Metric) | 100.0 |
| Cable Type | Any type of cable |
| Product Form | Sleeve-roll |
| Overall Length (Imperial) UOM | in |
| Product Color | Black |
| RoHS EU Comments | RoHS 2011/65/EU compliant without exemption |
| Halogen Free | Yes |
| Adhesive Lined | Yes |
| Flame Retardant | No |
| Sleeve Length | 29.5 |
| Inner Diameter Before Shrink (Imperial) UOM | in |