Bessey Tools
Induction Bearing Heater, up to 22 Inches OD, Maximum Width 11-1/2 Inches - BCS 220V
The BESSEY SC induction bearing heater mounts small and medium bearings the safe way. It heats the bearing evenly from within so the inner ring expands and slides onto the shaft, with no hammering, open flame or hot oil.
| Bearing capacity | Up to 11 in. OD (14 in. with optional raising blocks) |
| Power | 220V |
| Heating method | Magnetic induction |
| Unit size (L x W x H) | 7 x 10.75 x 9.5 in |
How hot should I heat a bearing? Usually about 80 to 90°C (145 to 160°F) above shaft temperature. Stay under the bearing maker's limit, generally 120°C (248°F) for open bearings and 80°C (176°F) for sealed ones. See our induction bearing heater guide.
Need 120V or a bigger heater? BESSEY also makes portable 120V models and larger BC and BCS units for bearings up to 22 in. OD.
Shop all induction bearing heaters.
Proper bearing installation is essential to safeguard maximum bearing life. Maintenance experts estimate that 27% of bearing failures can be attributed to improper installation and mounting errors. A bearing that is only a few thousandths of an inch out of alignment can have its lifespan cut in half. By heating the inner race to ~250°F prior to installation, the user allows the bearing to expand and slide easily onto the shaft. Magnetic induction is a safe and efficient method of generating heat to expand bearings for installation. No open flame or hot oil to worry about. Magnetic induction heats bearings evenly & quicker than hot plates. BESSEY. Simply better.
Features
| Length | 7 in |
|---|---|
| Bearing capacity | 4-3/8" x 11: O.D. (14" OD with optional raising blocks) |
| Height | 9.5 in |
| Width | 10.75 in |