The 40V max XGT® Brushless Cordless 1-3/16" AVT® Rotary Hammer Kit w/ Dust Extractor accepts SDS-PLUS bits, AFT®, AWS® Capable (model GRH08M1W) is a cordless concrete solution designed for heavy-load applications. It delivers the power, speed, and run-time for corded demands, without the cord. The GRH08M1W is powered by a 40V max battery with a Makita-built brushless motor that combines to deliver the power and performance required for heavy-load applications. It can deliver up to 135 of 3/8" holes using a fully charged 40V XGT® 4.0Ah battery*. The variable speed dial and trigger enable the user to match the speed to the application. This hard-hitting performance is combined with advanced comfort and convenience features including Active Feedback-Sensing Technology (AFT®), which electronically turns off the motor if the bit rotation is suddenly forced to stop. It is also equipped with Anti-Vibration Technology (AVT®) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. In addition, the vibration-absorbing back handle and side handle are engineered to further reduce vibration. For added durability in harsh job site conditions, Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance. The GRH08M1W has dust extraction capability and is OSHA Table 1 compliant with an on-board HEPA Dust Extractor or stand-alone AWS® Extractor options. For added efficiency, the Rotary Hammer is equipped with Auto-Start Wireless System (AWS®), which uses Bluetooth® technology for wireless power-on and power-off communication between the equipped tool and dust extractor (sold separately). Once connected via AWS, the AWS-equipped dust extractor will automatically power on or off when the AWS-equipped cordless tool starts or stops, running only when the tool is in use. This increases productivity on a single charge and reduces continuous noise at the job or work site. Constant speed control automatically applies additional power under load for optimum performance. The torque limiting clutch is engineered to prevent gear damage by automatically disengaging the gears if the bit binds, and constant speed control automatically adds power to the motor to maintain speed under load to complete the most demanding jobs. Additional performance features include an electric brake, a built-in L.E.D. light, and an ergonomic soft-grip handle with a large 2-finger trigger that provides increased comfort on the job. It also features a retractable hook that allows the tool to be secured when not in use. It has 3-modes of operation "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications. The GRH08M1W is ideal for a range of trades including mechanical/electrical/plumbing contractors, concrete contractors, road and bridge contractors, utility workers, pest control, maintenance operations, and more. It accepts SDS-PLUS bits. XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart, and outlast the rest. *Tested 2-3/8" deep holes in 5,000 PSI concrete
Features
- Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power and performance required for heavy-load applications
- Cloth Towel (443122-7)
- CONTROL - AFT® electronically turns off the motor if rotation of bit is suddenly forced to stop
- DUST MANAGEMENT - Dust extraction capability with OSHA Table 1 compliant on-board HEPA Dust Extractor
- COMFORT - AVT® is a counterbalance system along with vibration-absorbing handles that work to reduce vibration
- XGT® technology delivers up to 135 of 3/8" holes using a fully charged 40V XGT® 4.0Ah battery*
- Dust extraction capability with OSHA Table 1 compliant on-board HEPA Dust Extractor or stand-alone AWS® Extractor options
- Ergonomic soft-grip handle and large 2-finger trigger provide increased comfort on the job
- Built-in L.E.D. light with an independent on/off illuminates the work area
- OUT SMART: Constant speed control automatically applies additional power under load for optimum performance
- The XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
- 40V max XGT® Brushless 1-3/16" SDS-PLUS AVT® Rotary Hammer, AFT®, AWS® Capable (GRH08Z)
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears during a bind-up situation
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- Retractable tool hook secures the tool when not in use
- 40V max XGT® Rapid Optimum Charger (DC40RA)
- XGT® technology delivers up to 135 of 3/8" holes using a fully charged 40V XGT® 4.0Ah battery
- XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
- Auto-Start Wireless System (AWS®) which utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor (AWS® Transmitter sold separately)
- Anti-Vibration Technology (AVT®) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
- OUT POWER: Makita-built brushless motor along with 40V max XGT® battery combine to deliver the power and performance required for heavy-load applications
- Dust Extractor Attachment with HEPA Filter Cleaning Mechanism (DX10)
- The XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
- OUT LAST: Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- Variable speed dial and trigger enables user to match the speed to the application
- XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
- Electric brake allows the tool to be repositioned faster for maximum productivity
- The XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
- Overload protection is designed to protect the motor from burnout in abnormally high torque situations
- POWER - Brushless motor along with 40V max XGT® battery combine to deliver the power for heavy application
- Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
- 40V max XGT® Lithium-Ion 4.0Ah Battery (BL4040) reaches a full charge in 45 minutes or less
- Active Feedback-Sensing Technology (AFT®) electronically turns off the motor if rotation of bit is suddenly forced to stop
- INCLUDES - (1) 40V max XGT® Lithium-Ion 4.0Ah battery, charger, dust extractor, side handle, grease, towel, tool bag
- Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
- 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications
- 40V max XGT® 4.0Ah Battery (BL4040)
- Side Handle Assembly (126882-3)
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- Grease (194683-7)
- Tool Bag
- Constant speed control automatically applies additional power under load for optimum performance
- Auto-Start Wireless System (AWS®) which utilizes Bluetooth® technology for wireless power-on/off communication between tool and dust extractor
Prop 65
- WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. For more information, visit www.P65warnings.ca.gov.
US Dollars
