primary_image
primary_image
primary_image
Previous Next

3M Products & Supplies

3M™ Motor Lead Pigtail Splice 5301, 1 kV, 1-Hole Lug Connection, Feeder: 10-4 AWG , Motor Lead: 12-4 AWG , 1/Case - 7000005805

SKU: 7000005805
MPN: 7000005805
For an accurate lead time please contact us
UPC: 00054007122630
3M ID: 80008006415
5 Digit UPC: 12263
$85.99 each
Hurry up! Current stock:

Product Description

3M™ Motor Lead Pigtail Splicing Kits 5300 Series are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice’s main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit makes three splices and contains the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used. Kit contents include: • (3) Pigtail lug covers • (3) Mastic sealing strips • (3) Locking pins (kits 5302–5304 only) • (3) Tubes of silicone grease • (1) Instruction sheet

Features

  • For pigtail (stub) connections at 1000V or less
  • Includes 3 each of pigtail lug covers, mastic sealing strips, and tubes of silicone grease, plus an instruction sheet
  • CSA Certified and RoHS 2011/65/EU Compliant
  • Slip-on lug cover is made of durable EPDM rubber
  • Designed to use with copper compression, 1-hole lugs
  • Splices motor lead cables to incoming feeder cables
Spec Sheet

 

Downloads

Specifications

Country of OriginUnited States
Cable ShieldingNon-shielded
RoHS EU CommentsRoHS 2011/65/EU compliant without exemption
Maximum Motor Lead Size4 AWG
Application/IndustryCommercial Construction
Range Feeder Cable (AWG & kcmil)10-4
Lug Cover Inner Diameter (Metric)17.8 mm
Maximum Bolt Length (Metric)12.7 mm
Lug Cover Length (Metric)86.4 mm
Maximum Feeder Lead Size4 AWG
Maximum Operating Voltage1 kV
Insulation Outside Diameter Range (Metric)4.3 - 9.1 mm
ApplicationCross Linked Polyethylene Cable; Ethylene Propylene Rubber Cable; For Insulating and Sealing Motor Lead Connections for Copper Conductors; Polyethylene Cable
Insulation Outside Diameter0.17-0.36 Inch
Maximum Bolt Length1/2 in
Splice TypePigtail Only
Kit Includes(3) Pigtail Lug Covers
Units per Case1.0
Lug Cover Length3.4 in
Insulation Outside Diameter Range0.17-0.36 in
Product ColorBlack
Lug Cover Inner Diameter0.70 in

Customers Also Viewed